Home Forums Sunday Rides Sunday Ride 8th April

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #21428
    Morganite
    Member

    Here is the plan

    There is 2 routes long and short, both leave Bloomfield at 9 head north to Maenclochog in the village they split the long route carries on to New Inn straight across the Junction carry along turn right down to Pontfaen down to the Gwaun Valley, turn left towards Newport up Aunt Bessy (good luck) in to Newport, on the A487 to the Nevern turn, here turn right up the hill for about a mile turn left follow this road for about 2 miles, turn right towards Brynberian follow this road until you get there. Turn right follow route back over the hill down to New Inn turn left and back to Narbeth.

    This route is is 45miles 3000ft of climbing, someone need to follow the route as i am not there.

    Here is the link

    http://www.mapmyride.com/routes/view/81022731

    The short route turns right at Maenclochog follow road to Mynachlog-ddu follow road out at top Crymych follow main road back

    32 miles 1400ft climbing

    Here is the link

    http://www.mapmyride.com/routes/view/81026215

    #24622
    ValleyMan
    Member

    Why can’t Sweaty set the route or is this to pander to Roger’s new walking craze?

    #24623
    Sweaty Eds
    Member

    Comrade, thank you for your support. Come the glorious revolution your loyalty will be rewarded.

    Unfortunately, I am unable to attend this Sunday.

    #24624
    Roger
    Member

    I was just start out on my Easter Sunday ramble [ late start due to entertaining ] my shiny over-priced bike bouncing on my shoulders when over the hill came the advanced party of the Dynamos..so inspired was I that I sat on the saddle and turned the pedals..and before i knew it I had done the old short tour of Pembrokeshire- 64 miles 17.3 mph…big decision for me is whether or not to continue with the rambling…

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.